Page 1 of 1
SCATT Electronic Trainer question
Posted: Sun Sep 26, 2004 2:18 pm
by PaulT
I have a 5m SCATT sensor that accepts RJ45 (the 8 core cable) and a friend has a new SCATT unit that uses the RJ11 termination (the 4 core cable).
Has anybody knowledge of if these two items are compatible and if so, what the pin-outs for each end are so that he may borrow my 5m unit?
Re: SCATT Electronic Trainer question
Posted: Sun Sep 26, 2004 3:22 pm
by David Levene
PaulT wrote:I have a 5m SCATT sensor that accepts RJ45 (the 8 core cable) and a friend has a new SCATT unit that uses the RJ11 termination (the 4 core cable).
Has anybody knowledge of if these two items are compatible and if so, what the pin-outs for each end are so that he may borrow my 5m unit?
Can I suggest that the first thing to do is check the voltage at the target end of the 2 cables. I THINK you will find that one is gving 12v and the other 5v.
Posted: Mon Sep 27, 2004 12:17 pm
by Sandy
Contact the UK distributor at:
Diverse Trading Ltd.
32 Golf Side, Cheam, Surrey
SM2 7EZ England
tel: 020 8642 7861
fax: 020 8642 9959
or try
info@scatt.com. You should get the information at these sites.