1413 cheek piece upgrade question
Moderators: pilkguns, Marcus, m1963, David Levene, Spencer
-
- Posts: 11
- Joined: Tue Aug 23, 2016 8:00 am
1413 cheek piece upgrade question
Hi, I want to upgrade the cheek piece of my 1413 stock, for a more flat and adjustable one. For that I think I'll have to carve some wood and install a new 2-round column 30mm cheek carrier, and then decide if I should buy the cheek piece holder and add a MEC or HRO-TEC Cheek piece, for up to the millimeter adjusts or just go straight to a Anschutz laminated cheek piece with includes both the wood and columns.
Does anyone has any experience in such stock modification or can suggest an alternate method / parts, to replace the round cheek and gain some adjust ability?
I though about buying a 1918 precise stock, but they don't offer it in my favorite color. ;)
Saludos
Edgardo
Does anyone has any experience in such stock modification or can suggest an alternate method / parts, to replace the round cheek and gain some adjust ability?
I though about buying a 1918 precise stock, but they don't offer it in my favorite color. ;)
Saludos
Edgardo
- Attachments
-
- This could be a one cheek/base solution
- AnsCheekPiece.jpg (41.52 KiB) Viewed 1438 times
-
- MEC and other cheek pieces need this part as base, I guess
- CheekPieceCarrier2.jpg (9.82 KiB) Viewed 1438 times
-
- I think it all start with installing this piece
- CheekPieceCarrier.jpg (22.67 KiB) Viewed 1438 times
-
- My current rifle stock
- CheekPieceOriginal.jpg (51.63 KiB) Viewed 1438 times
Re: 1413 cheek piece upgrade question
Edgar,
There is not enough wood under the original 1413 cheekpiece to add the 2213-type carrier (your pics 2 and 3). I think you would need to fill the gap from the 1413 hardware with wood first.
You can remove the wooden top from the 1413 cheekpiece. I think the MEC or Tec-Hro would fit the 1413 bracket, maybe with a spacer.
There is not enough wood under the original 1413 cheekpiece to add the 2213-type carrier (your pics 2 and 3). I think you would need to fill the gap from the 1413 hardware with wood first.
You can remove the wooden top from the 1413 cheekpiece. I think the MEC or Tec-Hro would fit the 1413 bracket, maybe with a spacer.
-
- Posts: 11
- Joined: Tue Aug 23, 2016 8:00 am
Re: 1413 cheek piece upgrade question
Thanks for the idea Tim, this way the wood wouldn't have to be modified and just have to create an interface between both.
-ed
-ed
-
- Posts: 126
- Joined: Thu Oct 08, 2015 10:49 am
Re: 1413 cheek piece upgrade question
What's your favorite colour?
you can get a coloured Precise stock from Froewis.
http://www.froewis.co.at/anschuetz-3
J
you can get a coloured Precise stock from Froewis.
http://www.froewis.co.at/anschuetz-3
J
-
- Posts: 11
- Joined: Tue Aug 23, 2016 8:00 am
Re: 1413 cheek piece upgrade question
ShootWithStyle, its a combination of Ferrari-Red and EmptyWallet-White, cant't be other, I'm sorry.
;)
-ed
;)
-ed
-
- Posts: 11
- Joined: Tue Aug 23, 2016 8:00 am
Re: 1413 cheek piece upgrade question
Thanks for all your suggestions, my wife still says no.
This was written by me,
-ed
This was written by me,
-ed