TargetTalk

Can I use an old Nill LP10 grip on the new EVO?
In this case an EVO E version so I will need to use a router to make room for the electronic.
Is the base the same as on a LP10? Will a grip from a LP10 fit an EVO?

Today I have a LP10E and this model has a different way of fastening the grip, Steyr has as I understand it gone back to a screw at the bottom.

Have ordered a EVO E!

you won't get an answer, probably not even from Steyr. You'll have to compare when it arrives.

Here's a picture of a modified LP10 Grip for 10E.
http://toz35.blogspot.de/2010/08/adapte ... p-for.html

IF an old LP10 grip can be mounted on an EVO, then there is only one thing to do and that is to cut out for electronic.
In Igor´s case he had to think about the fastening screw as well, a lot more to deal with.

Does anyone have a LP10 and an EVO?

I do not fancy the idea of selling my Nill grip if I can use it. Nill will never make grip for an EVO E.

An LP10 (mechanical) grip will fit an Evo 10 mechanical trigger pistol no problem and vice versa. Just needs a M5X55 bolt for the Evo as it has a shorter grip rod.
But I notice on the Evo 10E parts list the grip fixing bolt (screw) part no 147 is a M4X30.

http://www.steyr-sport.com/en/downloads ... 0-e-1/file