Page 1 of 1
Pardini 32 ACP Bullseye
Posted: Tue Sep 13, 2016 1:00 pm
by gorbow
Does anyone know the barrel specs on the Pardini 32 ACP Bullseye model.
Bore
Length
Twist Rate
Re: Pardini 32 ACP Bullseye
Posted: Tue Sep 13, 2016 5:33 pm
by Rover
Why not ask Pardini USA?
Re: Pardini 32 ACP Bullseye
Posted: Tue Sep 13, 2016 7:02 pm
by gorbow
I did. Spoke with Alex at Pardini USA. Ha claims that the barrel information is proprietary. In his words, if he told me the barrel specs and I copied them and the gun blew up he would be libel. Hmmm.....
Re: Pardini 32 ACP Bullseye
Posted: Tue Sep 13, 2016 7:15 pm
by Rover
We both know that's bullshit. Sorry I suggested it.
Re: Pardini 32 ACP Bullseye
Posted: Tue Sep 13, 2016 8:23 pm
by gorbow
Yep
Re: Pardini 32 ACP Bullseye
Posted: Wed Sep 14, 2016 3:06 am
by ghillieman
As of right now the HP's are imported with the European .313" diameter barrel and then chambered for 32 Auto in the states. I mentioned to Vladimir at Perry this year they should look into importing them with out barrels and installing a .311" diameter barrel since all 32 Auto bullets are .312 and intended for the .311 barrel. He said they were looking into that. So the barrel diameter could change in the future, maybe not.
I have a .311 in my HP installed by Dave Wilson.
Re: Pardini 32 ACP Bullseye
Posted: Wed Sep 14, 2016 4:51 am
by gorbow
ghillieman:
Thank you for the bore info. Do you happen to know the twist of the European barrel?
Gorbow
Re: Pardini 32 ACP Bullseye
Posted: Wed Sep 14, 2016 5:39 am
by gorbow
Reply from Pardini Italy
HP New Bullseye
Bore: .313
Length: 120mm = 4.7244 inches
Twist: 6D x 450mm = 1 x 17.7165 inches
A note to Pardini USA: I wouldn't waste my time or money copying these barrel dimensions.
Re: Pardini 32 ACP Bullseye
Posted: Fri Sep 16, 2016 9:44 am
by Christopher Miceli
gorbow wrote:Reply from Pardini Italy
HP New Bullseye
Bore: .313
Length: 120mm = 4.7244 inches
Twist: 6D x 450mm = 1 x 17.7165 inches
A note to Pardini USA: I wouldn't waste my time or money copying these barrel dimensions.
LOL.. wonder if you can order it without a barrel =]
Re: Pardini 32 ACP Bullseye
Posted: Fri Sep 16, 2016 10:32 pm
by Chia
Uh...are they using a .32S&W bolt and recoil spring with a .32 acp barrel? Or am I missing something here?
Re: Pardini 32 ACP Bullseye
Posted: Sat Sep 17, 2016 10:20 am
by fc60
Greetings,
PardiniUSA supply a 32 ACP bolt with the 32 ACP pistols and conversion units.
The 32 ACP rim is smaller than the 32 S&W Long and as a result, the 32 S&W Long will not fit.
This prevents loading a 32 S&W Long in a 32 ACP by error.
Cheers,
Dave
Re: Pardini 32 ACP Bullseye
Posted: Sat Sep 17, 2016 1:07 pm
by Chia
fc60 wrote:Greetings,
PardiniUSA supply a 32 ACP bolt with the 32 ACP pistols and conversion units.
The 32 ACP rim is smaller than the 32 S&W Long and as a result, the 32 S&W Long will not fit.
This prevents loading a 32 S&W Long in a 32 ACP by error.
Cheers,
Dave
Thanks for that clarification!