Spring Piston match airgun lubricants

A place to discuss non-discipline specific items, such as mental training, ammo needs, and issues regarding ISSF, USAS, and NRA

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Post Reply
big52
Posts: 16
Joined: Sun Nov 04, 2007 5:04 am

Spring Piston match airgun lubricants

Post by big52 »

Was wondering if anyone here has ever did their own service on a spring piston match airgun? I have a Anschutz 250 that I had to take apart and was wondering what type of lubricants can be used in this gun. If anyone can give some advice it would be appreaciated as I don't want to send the gun to somebody and have them work on it.
randy1952
Posts: 469
Joined: Tue Aug 22, 2006 10:48 pm

Lubs

Post by randy1952 »

I would try and use a non-petroleum based lubricant such as TWB 25B by Milcomm. There are other non-petroleum based lubs, but TWB 25B has worked out the best for me. It's a little on the pricey side, but a little goes a long way. I used small sampler package given to me at a Shot Show about five years ago and I just finished it this year.
roysha
Posts: 3
Joined: Sun Jul 15, 2007 3:15 pm

Post by roysha »

Take a look at Air Rifle Headquarters (Maccari). He has a selection of lubes that might be what you need.
dlb
Posts: 114
Joined: Sun Dec 17, 2006 5:08 pm
Location: Pennsylvania, USA
Contact:

Post by dlb »

I use the white FWB grease and Maccari's 'clear tar' - http://www.airguns.citymax.com/page/page/251484.htm
Post Reply