SCATT trigger equivalent

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
Chia
Posts: 359
Joined: Thu Aug 18, 2016 7:53 am

SCATT trigger equivalent

Post by Chia »

I have borrowed a SCATT system from a very kind forum member for a number of months. Included with it is the SCATT trigger sensor.

You'll notice that the trigger profile is quite a bit narrower than most. I have noticed that I get much more consistent results with this type of trigger. Does anyone know of a company that produces such a trigger for the LP-10/EVO that does not include the electronic components and the added expense?
Chia
Posts: 359
Joined: Thu Aug 18, 2016 7:53 am

Re: SCATT trigger equivalent

Post by Chia »

Anyone?
Gwhite
Posts: 3188
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Re: SCATT trigger equivalent

Post by Gwhite »

There have been several postings over the last couple years on aftermarket trigger options, and I think many were for the Steyr. Some of them were designed for rifle shooters, but will fit a pistol as well.

MEC sells several triggers, and sells SCATT systems as well:

http://www.mec-shot.de/en/products/acce ... rigger-ii/

http://www.mec-shot.de/en/products/acce ... trigger-i/

http://www.mec-shot.de/en/products/acce ... startline/

I would contact them and see if they can recommend one that is similar to the SCATT.
mhkhung
Posts: 42
Joined: Tue Apr 27, 2010 9:38 pm

Re: SCATT trigger equivalent

Post by mhkhung »

Chia
Posts: 359
Joined: Thu Aug 18, 2016 7:53 am

Re: SCATT trigger equivalent

Post by Chia »

Thank you.
mhkhung
Posts: 42
Joined: Tue Apr 27, 2010 9:38 pm

Re: SCATT trigger equivalent

Post by mhkhung »

http://www.targettalk.org/viewtopic.php?t=28579

Matsuda seems to be using the LP-2 trigger shoe on the LP-10E (that I am temped to try switching.).

Also, our host sells an after market one too..
http://www.pilkguns.com/masprlist.htm
Post Reply