TargetTalk
http://targettalk.org/

Wanted --- Haemmerli 280 Rear Sight Blade
http://targettalk.org/viewtopic.php?f=7&t=56924
Page 1 of 1

Author:  fc60 [ Fri Jan 05, 2018 7:30 pm ]
Post subject:  Wanted --- Haemmerli 280 Rear Sight Blade

Greetings,

Looking for a 4.0 mm rear sight blade.

I have a 3.2 mm for trading stock. I also have spare 280 weights for trade, as well.

Cheers,

Dave

Author:  PFribley [ Sun Jan 07, 2018 8:23 am ]
Post subject:  Re: Wanted --- Haemmerli 280 Rear Sight Blade

Dave. Have you ever made one of your barrels for the 32cal 280???

Author:  fc60 [ Sun Jan 07, 2018 2:04 pm ]
Post subject:  Re: Wanted --- Haemmerli 280 Rear Sight Blade

Greetings,

Started to make a 280 barrel several years ago. It still sits in the cabinet.

Cheers,

Dave

Author:  jaxontarget [ Fri Jan 12, 2018 6:20 pm ]
Post subject:  Re: Wanted --- Haemmerli 280 Rear Sight Blade

fc60 wrote:
Greetings,

Looking for a 4.0 mm rear sight blade.

I have a 3.2 mm for trading stock. I also have spare 280 weights for trade, as well.

Cheers,

Dave



Don't mean to hijack your thread, but you may know that Larry's has 4.0mm blades in stock - I know since I just picked one up to replace my "U" blade that came on my pistol (sorry it's a narrower blade or I'd offer it up).

Do you happen to know the procedure for replacing the blade? It appears there is a pin (this is in an older 208 International), that is flush to the side of the sight body, and right up against the edge of the adjustment screw. It would seem like that pin needs to be removed to allow the screw and blade to come out, but there is no access to tap the pin from the other side, and very little room around the pin to gain purchase with pliers or pry it out (which I wouldn't try as it would likely scratch the side of the site body). I did a Google search and came up with one thread here that specified the pin needed to be removed, but offered no further instruction as to how. Do you know, or can you point me to a URL that has more than just an exploded diagram (which is of no use instructionally as to exactly how to remove things)?

Author:  fc60 [ Fri Jan 12, 2018 8:01 pm ]
Post subject:  Re: Wanted --- Haemmerli 280 Rear Sight Blade

Greetings Jaxontarget,

Thanks for the offer of help.

However, you are confusing the 208 with the 280.

I have the 280 and the rear sight blade slip in and out easily with the factory tool.

Cheers,

Dave

Author:  jaxontarget [ Fri Jan 12, 2018 8:15 pm ]
Post subject:  Re: Wanted --- Haemmerli 280 Rear Sight Blade

fc60 wrote:
Greetings Jaxontarget,

Thanks for the offer of help.

However, you are confusing the 208 with the 280.

I have the 280 and the rear sight blade slip in and out easily with the factory tool.

Cheers,

Dave



Absolutely correct! Dyslexic thread reading on my part. Mine is a 208 International. Thanks for the correction. Should anyone know the answer to my query, feel free to PM me.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/