SCATT Electronic Trainer question

A place to discuss non-discipline specific items, such as mental training, ammo needs, and issues regarding ISSF, USAS, and NRA

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Post Reply
PaulT
Posts: 206
Joined: Mon Mar 01, 2004 9:19 am
Location: UK

SCATT Electronic Trainer question

Post by PaulT »

I have a 5m SCATT sensor that accepts RJ45 (the 8 core cable) and a friend has a new SCATT unit that uses the RJ11 termination (the 4 core cable).

Has anybody knowledge of if these two items are compatible and if so, what the pin-outs for each end are so that he may borrow my 5m unit?
David Levene
Posts: 5618
Joined: Mon Mar 01, 2004 12:49 pm
Location: Ruislip, UK

Re: SCATT Electronic Trainer question

Post by David Levene »

PaulT wrote:I have a 5m SCATT sensor that accepts RJ45 (the 8 core cable) and a friend has a new SCATT unit that uses the RJ11 termination (the 4 core cable).

Has anybody knowledge of if these two items are compatible and if so, what the pin-outs for each end are so that he may borrow my 5m unit?
Can I suggest that the first thing to do is check the voltage at the target end of the 2 cables. I THINK you will find that one is gving 12v and the other 5v.
Sandy
Posts: 95
Joined: Wed Mar 03, 2004 6:16 pm
Location: San Diego, CA

Post by Sandy »

Contact the UK distributor at:

Diverse Trading Ltd.
32 Golf Side, Cheam, Surrey
SM2 7EZ England
tel: 020 8642 7861
fax: 020 8642 9959

or try info@scatt.com. You should get the information at these sites.
Post Reply