Grooved rifle receivers... 3/8" vs. 11mm question

A place to discuss non-discipline specific items, such as mental training, ammo needs, and issues regarding ISSF, USAS, and NRA

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Post Reply
218bee
Posts: 134
Joined: Sat Aug 30, 2014 7:04 pm

Grooved rifle receivers... 3/8" vs. 11mm question

Post by 218bee »

Looking at a clamp-on Skinner receiver peep sight billed as being for an "11mm CZ 452/455 receiver". Will this same sight fit grooved 3/8" US models like the Winchester 69A, 72, 9422, etc...?

Thanks for any help here..
j danielsson
Posts: 156
Joined: Mon Sep 16, 2013 6:31 am

Re: Grooved rifle receivers... 3/8" vs. 11mm question

Post by j danielsson »

1 inch equals 25.4 millimeters.
Black_Talon
Posts: 53
Joined: Fri May 08, 2009 9:03 pm
Location: SoCal

Re: Grooved rifle receivers... 3/8" vs. 11mm question

Post by Black_Talon »

218bee wrote:Will this same sight fit grooved 3/8" US models like the Winchester 69A, 72, 9422, etc...?

Thanks for any help here..
No it will not. An 11mm dovetail is different than a 3/8" dovetail. You will have to find a sight made for a 3/8" dovetail if you want to mount it on a 3/8" dovetail.
j danielsson
Posts: 156
Joined: Mon Sep 16, 2013 6:31 am

Re: Grooved rifle receivers... 3/8" vs. 11mm question

Post by j danielsson »

11mm is very near 7/16". Should have said that yesterday but my brain refused to function.
218bee
Posts: 134
Joined: Sat Aug 30, 2014 7:04 pm

Re: Grooved rifle receivers... 3/8" vs. 11mm question

Post by 218bee »

Thanks guys....I appreciate it..
Post Reply