Page 1 of 1

Where can I get a bolt assembly for a Hammerli SP 20?

Posted: Sat Feb 14, 2015 4:24 pm
by JohnCfromMD
My bolt assembly is cracked. Yes, Hammerli went out of business, and Walther now makes the SP20. I'm just wondering if the Walther and Hammerli gun parts are of same specific dimensions? Pleasae advise.
Thanks, John Ciccone

Re: Where can I get a bolt assembly for a Hammerli SP 20?

Posted: Sat Feb 14, 2015 4:27 pm
by David Levene
Why don't you email Walther and ask them. It might be an idea to give them the serial number of your gun.

Re: Where can I get a bolt assembly for a Hammerli SP 20?

Posted: Sat Feb 14, 2015 5:12 pm
by Leon
Try Larry's Guns. They have most SP20 parts in stock. Great to deal with as well...

Re: Where can I get a bolt assembly for a Hammerli SP 20?

Posted: Sun Feb 15, 2015 1:30 am
by j-team
You might want to sit down and have a stiff drink ready when they tell you the price!

Re: Where can I get a bolt assembly for a Hammerli SP 20?

Posted: Sun Feb 15, 2015 9:47 am
by PFribley
If all else fails. These folks might have one.

http://www.schiesssport-buinger.de/shoo ... re-pistols

Re: Where can I get a bolt assembly for a Hammerli SP 20?

Posted: Sun Feb 15, 2015 11:39 am
by fc60
Greetings,

I have a brand new SP-20 bolt assembly for the 32 S&W. I purchased it direct from Walther.

If this is what you need, send me a PM or email.

Cheers,

David

Re: Where can I get a bolt assembly for a Hammerli SP 20?

Posted: Mon Feb 16, 2015 3:09 am
by SamEEE
How/where did it crack out of curiosity? Were your buffers knackered? Shooting supersonic ammunition?

Re: Where can I get a bolt assembly for a Hammerli SP 20?

Posted: Mon Feb 16, 2015 12:07 pm
by JohnCfromMD
Dear SamEEE
You asked "How/where did it crack out of curiosity? Were your buffers knackered? Shooting supersonic ammunition?"

It is a design flaw or the selection of the wrong type of metal for the bolt by the manufacturer. I have NEVER high velocity .22 rimfire ammo. I have used only standard velocity ammo...CCI SV, Eley pistol Match, SK Standard Plus. My buffers were replaced once, but otherwise functional and AOK. This will be the 4th bolt I am replacing in the same gun!!!!!!!!!!!!!! I got my first bolt with the gun (naturally). Then two others from Larry's. The last one cost $250. Each bolt cracked in the same place.



I shoot the gun a lot, at least twice a week over a period of 12-15 years.

I figure I will fix the gun and then put it in the safe as a historical piece. And buy another pistol, I'm thinking of a Walther Expert.

Re: Where can I get a bolt assembly for a Hammerli SP 20?

Posted: Tue Feb 17, 2015 5:27 am
by SamEEE
Bugger. Pardini SP are worth a look.

GSPs are part of the old breed, but also not a bad piece.
They have a very upright grip which is a little strange.

Re: Where can I get a bolt assembly for a Hammerli SP 20?

Posted: Wed Feb 22, 2017 6:14 am
by Scott1
John,
There are no buffer/half circle o-rings on the .22 version of the Hammerli SP-20
I'd love to see just one of your 5 cracked slide pictures.
These are the finest standard pistols I have shot, I've owned & tried all but the AW93

Re: Where can I get a bolt assembly for a Hammerli SP 20?

Posted: Thu Feb 23, 2017 9:38 am
by PFribley
I have had an SP20RRS since 2008. Shoot it often on the same slide.Do you have the regular SP20???

Re: Where can I get a bolt assembly for a Hammerli SP 20?

Posted: Fri Feb 24, 2017 10:40 pm
by EdStevens
I started with .22 and .32 conversions for my SP-20. The .22 slide broke at the "ear" on the slide years ago. I still shoot the gun, but as .32 only. My dealer had a ziplock bag with at least 5 slides all broken there.