Extending target life.

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
toddinjax
Posts: 298
Joined: Wed Feb 24, 2010 10:04 pm

Extending target life.

Post by toddinjax »

Given the cost of targets and current supply chain issues, I bought a roll of these 2.5” adhesive dots. They are actually 1/8th inch shy of 2.5”, making them just about 1/8 larger than the black of a pistol target. I find they work quite well, of course you can’t easily score them but you know damn well where the center is. Speaking of supply chain hooliganisms, I bought a roll of 500 of 2.5” just a couple weeks ago and paid about $13 for the roll. Hope this is of use for folks here. I get so much from this board, I’d like to feel that I can add something to it.
https://www.amazon.com/2-5-Inch-Black-C ... 722&sr=8-2
PirateJohn
Posts: 256
Joined: Mon Sep 13, 2021 5:33 pm

Re: Extending target life.

Post by PirateJohn »

There's always downloading or creating an image of a target and printing it out. It doesn't create clean holes like a real target but it's good enough for most purposes.
toddinjax
Posts: 298
Joined: Wed Feb 24, 2010 10:04 pm

Re: Extending target life.

Post by toddinjax »

Given the cost of replacement ink cartridges it might be cheaper to just buy the targets. If you have a piece of cardboard behind the target/sticker, it makes a decent clean hole.
User avatar
6string
Posts: 445
Joined: Tue Aug 14, 2007 11:53 pm

Re: Extending target life.

Post by 6string »

Assuming you can hold at least within the black, save your old targets and cut up the unused portions to make patches about 1-2" square. You can then tape or glue a patch to the back of your target in use.
You can spray paint these patches black if you like. This preserves the appearance of the black.
I glue them on with aerosol spray adhesive, but tape or white/yellow glue works too.
The nice thing is, you still get clean holes, albeit the scoring rings get obliterated pretty quick.
PirateJohn
Posts: 256
Joined: Mon Sep 13, 2021 5:33 pm

Re: Extending target life.

Post by PirateJohn »

toddinjax wrote: Tue Nov 16, 2021 5:33 pm Given the cost of replacement ink cartridges it might be cheaper to just buy the targets. If you have a piece of cardboard behind the target/sticker, it makes a decent clean hole.
Oh, I dunno. I get toner cartridges for about $70 and they can print several thousand pages. I print two targets per page (I omit the 1 and 2 rings so they'll fit). So when you include the cost of paper, I'm probably only spending about three cents per target. If I use card stock, it's probably four or five cents. The last targets I bought were eight cents each.
User avatar
6string
Posts: 445
Joined: Tue Aug 14, 2007 11:53 pm

Re: Extending target life.

Post by 6string »

If you guys can print out a target that's as nice as Edelmann or Kruger, I'd like to know about it!
Gwhite
Posts: 3187
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Re: Extending target life.

Post by Gwhite »

How does a penny a target sound, with good paper?

https://www.targettalk.org/viewtopic.ph ... 92#p308992
BobGee
Posts: 564
Joined: Fri Oct 01, 2010 6:43 am
Location: Sydney, Australia

Re: Extending target life.

Post by BobGee »

6string wrote: Tue Nov 16, 2021 6:10 pm The nice thing is, you still get clean holes, albeit the scoring rings get obliterated pretty quick.
Obliterating the scoring rings is no bad thing in practice/training. With no scoring rings you can focus more on group size and where the group centre is. Only need to score in a match when you’d most likely be using new targets anyway.

Bob
Post Reply