TargetTalk

A forum to talk about Olympic style shooting, rifle or pistol, 10 meters to 50 meters, and whatever is in between. Hosted by Pilkguns.com
It is currently Wed Jul 26, 2017 5:40 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Pardini Fiocchi P10
PostPosted: Mon Apr 24, 2017 11:07 am 
Offline

Joined: Thu Apr 20, 2017 12:34 pm
Posts: 3
Hi there
I have recently purchased a Pardini-Fiocchi P10 in a poor condition and decided to overhaul it completely as much as possible to its original condition. I have already ordered at local dealer, a complete set of seals. After dismounting almost entirely the gun, I realised that, so far, and due to lack of instructions/manuals, I am not able to separate the trigger/valve control system, apart from the compression cylinder
Perhaps someone out there, more experienced in this could help me to face this specific task.


Top
 Profile  
 
 Post subject: Re: Pardini Fiocchi P10
PostPosted: Mon Apr 24, 2017 1:29 pm 
Offline

Joined: Tue Feb 18, 2014 3:10 pm
Posts: 180
Does this help?

http://www.pilkguns.com/tenp/spparp10.htm


Top
 Profile  
 
 Post subject: Re: Pardini Fiocchi P10
PostPosted: Mon Apr 24, 2017 1:50 pm 
Offline

Joined: Thu Apr 20, 2017 12:34 pm
Posts: 3
Tks a lot DFWdude, however despite helpful, it does not mention the solution to dismount the cylinder and keeping it apart from the trigger assembly.


Top
 Profile  
 
 Post subject: Re: Pardini Fiocchi P10
PostPosted: Mon Apr 24, 2017 3:32 pm 
Offline

Joined: Tue Feb 18, 2014 3:10 pm
Posts: 180
It's been three decades since I worked on a P10. Does the compression tube simply not pull away from the trigger group? It's not held in place by any screws that I can remember... only by the pressure of it's o-ring.

BTW, here is a link to the official manual... http://www.pardini.it/manuali/manual%20 ... %20p10.pdf


Top
 Profile  
 
 Post subject: Re: Pardini Fiocchi P10
PostPosted: Mon Apr 24, 2017 3:44 pm 
Offline

Joined: Thu May 22, 2008 2:21 pm
Posts: 27
Location: Virginia
The Pardini P10 kit shows the same diagram with a bit better resolution: https://www.pardiniguns.com/store/produ ... cts_id=908

If the cylinder seems 'stuck' to the trigger group, perhaps some Kroil might help? If that sounds like Japanese, then disregard.

Good luck!

Stan


Top
 Profile  
 
 Post subject: Re: Pardini Fiocchi P10
PostPosted: Tue Apr 25, 2017 3:43 am 
Offline

Joined: Thu Apr 20, 2017 12:34 pm
Posts: 3
Yes fellows, many thanks for yr kind cooperation. You are correct. I am going to try to detach the cylinder this way, otherwise I suppose I have to keep it in the current place and forget to replace the associated seals including the valve ones...


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: deadeyedick, zanemoseley and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group