TargetTalk

A forum to talk about Olympic style shooting, rifle or pistol, 10 meters to 50 meters, and whatever is in between. Hosted by Pilkguns.com
It is currently Sun Mar 26, 2017 3:50 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Sun Feb 26, 2017 4:38 am 
Offline

Joined: Sun Feb 26, 2017 4:13 am
Posts: 2
Hello everyone,
I am having an issue with the cocking lever.
When I try and put the lever all the way down to fire, the lever seems loose since sometimes it slips up in between the dry-fire and fire symbols.

Is there supposed to be a click when the lever is put into firing position?
How do I go about fixing this issue?

I have added photos that show the issue.

Any help would be much appreciated.

Image

Image


Top
 Profile  
 
PostPosted: Sun Feb 26, 2017 5:43 am 
Offline

Joined: Wed Mar 17, 2004 10:50 pm
Posts: 57
Location: Aus
Video is for LP10 but concept should be similar for LP2
https://m.youtube.com/watch?v=Gyjqpemief4

****Edit****
Please see posts below by pbrejsa, the video above seems not to apply to LP2.


Last edited by argus on Tue Feb 28, 2017 4:03 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Sun Feb 26, 2017 11:33 am 
Offline

Joined: Tue Mar 06, 2007 12:51 am
Posts: 56
Location: czech republic
to lock try to screw part number 52, see pics
you will need the good allen key size 1.5 mm


Attachments:
02.jpg
02.jpg [ 11.33 KiB | Viewed 359 times ]
01.jpg
01.jpg [ 15.15 KiB | Viewed 359 times ]
Top
 Profile  
 
PostPosted: Sun Feb 26, 2017 12:07 pm 
Online

Joined: Tue Feb 18, 2014 3:10 pm
Posts: 159
pbrejsa wrote:
to lock try to screw part number 52, see pics
you will need the good allen key size 1.5 mm
NOPE.

Play the Barrel Adjustment video posted by Argus. This is the right procedure for adjusting screws (pt 44) for proper pressure against the cocking lever..


Top
 Profile  
 
PostPosted: Sun Feb 26, 2017 1:46 pm 
Offline

Joined: Tue Mar 06, 2007 12:51 am
Posts: 56
Location: czech republic
you're off. This problem has been solved at a few LP2s.
Sorry LP2 is not LP10 !!!
When it fails setting slotted screw moving, it can replace the cocking lever Nr 95.


Top
 Profile  
 
PostPosted: Sun Feb 26, 2017 3:35 pm 
Offline

Joined: Sun Feb 26, 2017 4:13 am
Posts: 2
Thank you everyone for the help.

I have tried both methods. It seems that tigtening the setting slotted screw slightly worked in making the cocking lever stay down and not slip up.


Top
 Profile  
 
PostPosted: Sun Feb 26, 2017 11:49 pm 
Offline

Joined: Tue Mar 06, 2007 12:51 am
Posts: 56
Location: czech republic
Of course. After settling I recommend to use a few the Loctite 243


Top
 Profile  
 
PostPosted: Tue Feb 28, 2017 3:30 am 
Offline

Joined: Mon Dec 28, 2015 4:40 pm
Posts: 229
yeah, first un-tighten the left screw, then tighten the right 44 screw, after you're happy with the force, you tighten the left 44 screw


Top
 Profile  
 
PostPosted: Fri Mar 10, 2017 9:43 pm 
Offline

Joined: Mon Nov 07, 2016 9:09 pm
Posts: 54
I'm having a similar issue with my LP2 that just started this evening. In my case the cocking lever goes fully down,even clicks down normally, but when the trigger is pulled I only get a dry-fire release. I have 175bar in the cylinder. This just started happening after 30+shots without a hiccup. Can anyone tell me where to start? I think I have the manual as a download somewhere but no hard copy.


Top
 Profile  
 
PostPosted: Sat Mar 11, 2017 12:33 am 
Offline
User avatar

Joined: Mon Mar 28, 2005 2:48 am
Posts: 1138
Location: New Zealand
jaxontarget wrote:
I'm having a similar issue with my LP2 that just started this evening. In my case the cocking lever goes fully down,even clicks down normally, but when the trigger is pulled I only get a dry-fire release. I have 175bar in the cylinder. This just started happening after 30+shots without a hiccup. Can anyone tell me where to start? I think I have the manual as a download somewhere but no hard copy.


Check the screw that hold the little lever that block the striker for dry fire (that's part 40 on that pic above). I've had that come loose and you get dry fire when it's supposed to be live fire.


Top
 Profile  
 
PostPosted: Sat Mar 11, 2017 2:09 am 
Offline

Joined: Mon Nov 07, 2016 9:09 pm
Posts: 54
j-team wrote:
jaxontarget wrote:
I'm having a similar issue with my LP2 that just started this evening. In my case the cocking lever goes fully down,even clicks down normally, but when the trigger is pulled I only get a dry-fire release. I have 175bar in the cylinder. This just started happening after 30+shots without a hiccup. Can anyone tell me where to start? I think I have the manual as a download somewhere but no hard copy.


Check the screw that hold the little lever that block the striker for dry fire (that's part 40 on that pic above). I've had that come loose and you get dry fire when it's supposed to be live fire.



Thanks, j-team. I removed the barrel and gently pushed through the pellet from the breach end with a cleaning rod. I thought the rear screw for the barrel felt loose on removing it. I tightened it first as instructed above for the LP10. Then tightened the front. Now it fires normally...so it may have just been a matter of that rear screw coming loose (?). I will also check the screw you suggest. Thanks.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: Bing [Bot], DFWdude, Gwhite and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group