Sam/Anschutz M10 air pistol parts manual

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
David M
Posts: 1624
Joined: Wed Mar 24, 2004 6:43 pm

Sam/Anschutz M10 air pistol parts manual

Post by David M »

Looking for a Sam M10 parts manual, an internet search found nothing and samair.com no longer exists.
Need to know the seal sizes.
Rover
Posts: 6986
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: Sam M10 air pistol parts manual

Post by Rover »

I have one, too. I think I was the last customer to be served by them after they went out of business. (Thank you, Marco Dolino.)

You won't be able to get parts, even if you know what you want. Marco sent me extra seals, free, but I'm not turning loose of those.

We're fucked, amigo!
David M
Posts: 1624
Joined: Wed Mar 24, 2004 6:43 pm

Re: Sam M10 air pistol parts manual

Post by David M »

Thanks Rover, I will pass on the bad news to the owner.
Rover
Posts: 6986
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: Sam M10 air pistol parts manual

Post by Rover »

Not to leave you totally stranded....I would go down to ACE hardware and rummage though their huge supply of loose O-rings. Good luck!
User avatar
deadeyedick
Posts: 1177
Joined: Thu Jan 24, 2008 5:55 pm
Location: Australia

Re: Sam M10 air pistol parts manual

Post by deadeyedick »

I sourced all o rings at a local o ring manufacturer without any problems. Simply take along what you need and supply was not a problem with the exception of a small ( very small ) flat section seal resembling an o ring with flat sides that is hidden internally within the frame directly in front of where the cylinder attaches and requires a special tool for removal which I made.
All problems I had were related to this flat ended seal which produced low and erratic pressure.
David M
Posts: 1624
Joined: Wed Mar 24, 2004 6:43 pm

Re: Sam M10 air pistol parts manual

Post by David M »

The quad seal is one of the problems, but it would be nice to know the size.
I am yet to see the pistol, so far only pictures.
User avatar
rmca
Posts: 1185
Joined: Sun Nov 04, 2012 3:55 pm
Location: Lisbon, Portugal

Re: Sam M10 air pistol parts manual

Post by rmca »

I saw a printed manual a couple of years ago, and it had an exploded drawing and parts list.
I don't remember if it had the dimentions for the o-rings...
Maybe someone who has one, could scan and post it?
User avatar
deadeyedick
Posts: 1177
Joined: Thu Jan 24, 2008 5:55 pm
Location: Australia

Re: Sam M10 air pistol parts manual

Post by deadeyedick »

The quad seal is one of the problems, but it would be nice to know the size.
I am yet to see the pistol, so far only pictures.
After removing the internal regulator parts it is very hard to find the “ quad seal” as you have referred to it David, however it is within a machined piece that looks as if it is a single piece but in fact consists of two parts. Pushing on the projecting pin allows separation.
The o ring size is easily determined as it presses over the pin and then into a machined cup around the base of the pin.
I found an o ring that had its ring OD the same as the width of the cup, drilled a tiny hole and parted it off with a scalpel then pressing it over the pin and into the cup.
The tricky part was determining its depth which turned out to be approx 2 mm.

Once reinstalled it shot perfectly round and consistent holes.
bnice
Posts: 86
Joined: Fri Sep 30, 2011 4:15 pm

Re: Sam M10 air pistol parts manual

Post by bnice »

trying to reserect this post. I am looking for a parts break down for my m10.
bnice
Posts: 86
Joined: Fri Sep 30, 2011 4:15 pm

Anschutz M10 Air Pistol

Post by bnice »

does anyone have a Anschutz M10 parts manual (breakdown) and a source for parts?
Last edited by bnice on Mon Nov 27, 2023 9:19 pm, edited 1 time in total.
Tim S
Posts: 2018
Joined: Mon Jan 03, 2011 11:33 am
Location: Taunton, Somerset

Re: Anschutz M10

Post by Tim S »

That's a Match 64 action isn't it? Anschutz have 64 manuals as free PDFs on their website: https://www.anschuetz-sport.com/en/down ... leitungen/

These won't cover the stock I'm afraid, as I think that was made by Savage.
bnice
Posts: 86
Joined: Fri Sep 30, 2011 4:15 pm

Re: Anschutz M10

Post by bnice »

Sorry I wasnt clear, I dont need the model 10 rifle but the Air pistol. Also the model 10 rifle is more like there cheaper 2000 action they made or the acheiver not a 64 action but thanks for the try.
Tim S
Posts: 2018
Joined: Mon Jan 03, 2011 11:33 am
Location: Taunton, Somerset

Re: Anschutz M10 Air Pistol

Post by Tim S »

Sorry, can't help with the air pistol.

The SA mk 10b was a 2000 action but the 10a was a 64 though.
ABerryhill
Posts: 257
Joined: Sun Oct 25, 2015 4:22 pm

Re: Anschutz M10 Air Pistol

Post by ABerryhill »

I've got an M10 that leaks and is no longer needed in my collection. I'd be willing to entertain offers for it. What do you have in mind?

Andrew

Precision Target Pistol Grips
bnice
Posts: 86
Joined: Fri Sep 30, 2011 4:15 pm

Re: Anschutz M10 Air Pistol

Post by bnice »

Is the leak internal to the gun or the cylinder?
bnice
Posts: 86
Joined: Fri Sep 30, 2011 4:15 pm

Re: Anschutz M10 Air Pistol

Post by bnice »

BA_LP_M10_DE 9.pdf
(169.83 KiB) Downloaded 87 times
Image

got a part breakdown, I need part 362 or at least the dimensions of the phenolic head of the part and length of stem exposed.
User avatar
m1963
Posts: 570
Joined: Sat Feb 20, 2010 9:13 am
Location: Ohio

Re: Sam M10 air pistol parts manual

Post by m1963 »

Parts diagram for M10 added from B,S,T post- for future reference.
Attachments
IMG_0066.jpeg
User avatar
m1963
Posts: 570
Joined: Sat Feb 20, 2010 9:13 am
Location: Ohio

Re: Anschutz M10 Air Pistol

Post by m1963 »

Looking at the M10 diagram and the Morini 162 ei diagram, it may be possible that part 362 on the m10 is the same (or close) as part 162047T, on the 162EI. It also makes sense as C. Morini designed both pistols...

Topics merged.
Attachments
IMG_0070.jpeg
bnice
Posts: 86
Joined: Fri Sep 30, 2011 4:15 pm

Re: Sam/Anschutz M10 air pistol parts manual

Post by bnice »

Thank you, good catch. I emailed Morini and asked if they maybe interchangable or easily modified to work. Hopefully they will respond with good news. Design looks very similar on many parts.
bnice
Posts: 86
Joined: Fri Sep 30, 2011 4:15 pm

Re: Sam/Anschutz M10 air pistol parts manual

Post by bnice »

contacted Morini and they told me the parts are not the same. Heres there response. really surprised as there are alot of parts that look the same.

"Actually Morini CM 162EI and SAM M10 are two completely different pistols and for sure the parts are not the same.
Cesare Morini was working in the Morini company and then left and opened SAM in the same place, but we had nothing to do with him."
Post Reply