CM84E Lubrication

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
specs
Posts: 12
Joined: Wed Dec 07, 2016 7:47 pm

CM84E Lubrication

Post by specs »

Just bought a Morini CM84E and have a couple questions on lubrication.
What oil is recommended for lubrication?
What points should be oiled?

Thanks all for any help.
Specs
Gwhite
Posts: 3188
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Re: CM84E Lubrication

Post by Gwhite »

The only thing I ever do besides wiping the surfaces down with a silicone cloth is to put a bit of grease on edge of the action lever where it operates the breech block.
specs
Posts: 12
Joined: Wed Dec 07, 2016 7:47 pm

Re: CM84E Lubrication

Post by specs »

Thanks for the help. Would Lubriplate 130-A work, I use it on my M1A?
Gwhite
Posts: 3188
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Re: CM84E Lubrication

Post by Gwhite »

Lubriplate is fine. That was my Dad's favorite gun grease, and has been around forever. Almost any good gun grease would work.
specs
Posts: 12
Joined: Wed Dec 07, 2016 7:47 pm

Re: CM84E Lubrication

Post by specs »

Thank you, think I am all set then.
Post Reply