SCATT...time in the 10.0 area

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
400driver
Posts: 121
Joined: Tue Aug 21, 2012 7:15 am
Location: Barcelona , Spain

SCATT...time in the 10.0 area

Post by 400driver »

During a nice hold using Scatt at 10 m distance with a 9mm pistol, I see a figure of between 70-85% time in the 10.0 area. When looking at the trace it does not appear that the stated percentage falls within the 10.0 ring!
Any thoughts?
David Levene
Posts: 5618
Joined: Mon Mar 01, 2004 12:49 pm
Location: Ruislip, UK

Re: SCATT...time in the 10.0 area

Post by David Levene »

I'm guessing that you've got "Steadiness in 10.0" turned on, rather than "Steadiness in 10.0 (center of the target)".

The former would give you the percentage of the control time in a 10.0 ring sized group, the latter would be the percentage of the control time in the 10.0 ring.
400driver
Posts: 121
Joined: Tue Aug 21, 2012 7:15 am
Location: Barcelona , Spain

Re: SCATT...time in the 10.0 area

Post by 400driver »

Thanks , I will take a look in the settings.
Post Reply