PARDINI SP MAGAZINE FLOOR PLATE

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
FOX
Posts: 3
Joined: Tue May 24, 2016 7:22 pm

PARDINI SP MAGAZINE FLOOR PLATE

Post by FOX »

I can't believe that the floor plate on one of my Pardini SP magazines failed. The plastic part that slides into the two rails separated from the floor plate. Has this happened to anyone? I'm looking for this part.
Thank you
Attachments
Pardini magazine floor plate
Pardini magazine floor plate
Gwhite
Posts: 3188
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Re: PADRONI SP MAGAZINE FLOOR PLATE

Post by Gwhite »

A) It happens. Not often, but it does happen. My wife & i have Pardinis, with a total of 6 magazines we've been shooting for ~ 10 years. Never had a problem.

B) Someone in Massachusetts machines aluminum ones that won't break

C) Pardini sells the plastic replacement parts

D) This is an international forum. It helps if you tell us what country you are in.
FOX
Posts: 3
Joined: Tue May 24, 2016 7:22 pm

Re: PARDINI SP MAGAZINE FLOOR PLATE

Post by FOX »

I'm from the United States and I appreciate your reply.
Gwhite
Posts: 3188
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Re: PARDINI SP MAGAZINE FLOOR PLATE

Post by Gwhite »

FOX
Posts: 3
Joined: Tue May 24, 2016 7:22 pm

Re: PARDINI SP MAGAZINE FLOOR PLATE

Post by FOX »

Thank you so much.
machinist mike
Posts: 79
Joined: Sat Oct 13, 2012 6:36 pm

Re: PARDINI SP MAGAZINE FLOOR PLATE

Post by machinist mike »

re: Aluminum magazine baseplates for pardini SP

Could you tell me who makes the aluminum baseplates for the pardini magazines?

Thank you
Gwhite
Posts: 3188
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Re: PARDINI SP MAGAZINE FLOOR PLATE

Post by Gwhite »

I think the guy who makes them is a local retired machinist who shoots in the Greater Boston bullseye league. I think he basically makes them manually (not CNC), so he isn't set up for mass production. He may have an ad posted at out club, but it will be a few days before I can check.

I'll try to investigate and get back.
Post Reply