Page 1 of 1

What is this 22 lr reamer called, who sells one

Posted: Thu Nov 02, 2017 7:16 pm
by Trooperjake
What is this 22 lr reamer called, who sells one?

I need a reamer to restore an Anschutz rifle chamber that was damaged by dry firing.
Now a round will not chamber.

Also what is the proper protrudement from bolt face for the firing pin.

Thanks,

Re: What is this 22 lr reamer called, who sells one

Posted: Thu Nov 02, 2017 9:09 pm
by High Left
What you want is one of these, unfortunately discontinued.

https://www.brownells.com/gunsmith-tool ... d8869.aspx

The idea is to form the metal back out rather than to cut it away.

Re: What is this 22 lr reamer called, who sells one

Posted: Thu Nov 02, 2017 9:31 pm
by Trooperjake
Anyone have one I can borrow or rent?

Re: What is this 22 lr reamer called, who sells one

Posted: Fri Nov 03, 2017 4:31 am
by rmca
A 5mm punch and a small hammer can do most of the work.
Insert the punch in the chamber and gently hammer on the side of the punch. That should take care of the bulk of the burr.
A small fine file and some polish paste can do the rest.
It isn't difficult to do...

Hope this helps

Re: What is this 22 lr reamer called, who sells one

Posted: Fri Nov 03, 2017 8:52 am
by Trooperjake
Thanks RCMA
If I can’t get the iron tool,
I will try it.

Re: What is this 22 lr reamer called, who sells one

Posted: Fri Nov 03, 2017 1:24 pm
by acorneau
You might ask over on Rimfire Central. I'd bet someone over there has one.

Re: What is this 22 lr reamer called, who sells one

Posted: Fri Nov 03, 2017 3:03 pm
by jaxontarget
PM'd you - if I can locate mine you can borrow it. I'll check tonight after work.

Re: What is this 22 lr reamer called, who sells one

Posted: Fri Nov 03, 2017 3:45 pm
by m1963
If jaxontarget cannot locate one, I have one you could use, as well.

Re: What is this 22 lr reamer called, who sells one

Posted: Sat Nov 04, 2017 12:00 pm
by jaxontarget
m1963 wrote:if jaxontarget cannot locate one, I have one you could use, as well.

I just located mine. I'll try to ship it out today.

Re: What is this 22 lr reamer called, who sells one

Posted: Mon Nov 06, 2017 6:57 am
by Rover
It doesn't matter since you found a reamer, but I like RMCA's style.

I cleaned one up just using a small round Swiss file.

Re: What is this 22 lr reamer called, who sells one

Posted: Mon Nov 06, 2017 11:38 am
by Tim S
Will a file work if the barrel face is dented? It would remove any burrs in the chamber, but is it a problem if the face above is still dented?

Never had to deal with dry fire damage, so I'm interested to know.

Re: What is this 22 lr reamer called, who sells one

Posted: Mon Nov 06, 2017 5:52 pm
by Rover
To be honest, I just cleaned up the burr. There wasn't much other damage. It won't cost you anything to try it and take it from there.