FWB 602 Short Loading Gate?

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Post Reply
Mtl_Biker
Posts: 204
Joined: Tue Apr 26, 2016 8:06 am
Location: Montreal, Canada

FWB 602 Short Loading Gate?

Post by Mtl_Biker »

I've been searching online and haven't had any success. I'm looking for a short loading gate for my FWB 602 so that I could mount a scope on it. I did find one at Cibles Canada and they said it would work, but it doesn't. It's really for the 600/601 and the pins are a different size and are held in place with c-clips while on the 602 the pins are thicker and seem to be press-fit without any c-clips.

Short of modifying the existing loading gate, which I do NOT want to do, any ideas on where I might find one?

Thanks
AA S510 Xtra FAC Ultimate Sporter *CARBINE* .22
CZ200S "Green" .177
Feinwerkbau 800 Evolution Top
AA S400 MPR FT .177
Steyr EVO 10
Weihrauch HW50S .22
Gwelo
Posts: 236
Joined: Thu Jan 19, 2012 10:14 pm
Location: Arizona

Re: FWB 602 Short Loading Gate?

Post by Gwelo »

Try Neal Stepp at ISS http://www.iss-internationalshootersservice.com/

When I scoped my 602 a few years ago the short loading gates were nowhere to be found. I ended up modifying mine. It would probably be easier modifying the one you have and finding a factory loading gate to keep in reserve. Good luck!
cstan
Posts: 2
Joined: Thu Jul 14, 2016 3:27 pm

Re: FWB 602 Short Loading Gate?

Post by cstan »

They are available on Ebay

http://www.ebay.com/itm/Feinwerkbau-Mod ... 568678e1e7

cstan

PS: Sorry these have the e-clip
Mtl_Biker
Posts: 204
Joined: Tue Apr 26, 2016 8:06 am
Location: Montreal, Canada

Re: FWB 602 Short Loading Gate?

Post by Mtl_Biker »

cstan wrote:They are available on Ebay

http://www.ebay.com/itm/Feinwerkbau-Mod ... 568678e1e7

cstan

PS: Sorry these have the e-clip
That is the one I bought, after they assured me it would work on the 602. When I contacted them, the description only mentioned the 600 and 601, but they said it would work and then changed the description to add the 602.

The pins on the gate they sent me are a lot thinner than the original ones on the gun now, and they require c-clips to hold them in place. The 600 and 601 HAVE those c-clips, but the 602 does not. They're going to send me some c-clips and even though the pins would be a lot more loose than the originals, they think it should still work. Guess I'll find out soon.
AA S510 Xtra FAC Ultimate Sporter *CARBINE* .22
CZ200S "Green" .177
Feinwerkbau 800 Evolution Top
AA S400 MPR FT .177
Steyr EVO 10
Weihrauch HW50S .22
Mtl_Biker
Posts: 204
Joined: Tue Apr 26, 2016 8:06 am
Location: Montreal, Canada

Re: FWB 602 Short Loading Gate?

Post by Mtl_Biker »

Gwelo wrote:Try Neal Stepp at ISS http://www.iss-internationalshootersservice.com/

When I scoped my 602 a few years ago the short loading gates were nowhere to be found. I ended up modifying mine. It would probably be easier modifying the one you have and finding a factory loading gate to keep in reserve. Good luck!
Thanks. I sent Neal an email this morning asking if he had anything available but he hasn't yet replied.
AA S510 Xtra FAC Ultimate Sporter *CARBINE* .22
CZ200S "Green" .177
Feinwerkbau 800 Evolution Top
AA S400 MPR FT .177
Steyr EVO 10
Weihrauch HW50S .22
Gwelo
Posts: 236
Joined: Thu Jan 19, 2012 10:14 pm
Location: Arizona

Re: FWB 602 Short Loading Gate?

Post by Gwelo »

The best way to reach Neal is by phone 817-595-2090.
Post Reply