AIR FILL STATION PLANS

Connecting with the collegiate coaches.

Moderators: pilkguns, m1963

Post Reply
Chuckiep
Posts: 51
Joined: Thu Oct 23, 2014 1:49 pm

AIR FILL STATION PLANS

Post by Chuckiep »

We are looking to build an multi-valve fill station, like the ones used at CMP or FT Benning. Does anyone have a parts list or a company that builds these?
ChipEck
Posts: 462
Joined: Tue Apr 23, 2013 5:50 pm
Location: Wisconsin

Re: AIR FILL STATION PLANS

Post by ChipEck »

They have a really neat one at USA Shooting Center in Colorado Springs. Took a StackOn safe on its side and ran a pipe through with every possible fill adapter. Pipe goes through the wall to a big tank and commercial air compressor. By using a Stack on safe they can lock it when they have to.

Chip
ChipEck
Posts: 462
Joined: Tue Apr 23, 2013 5:50 pm
Location: Wisconsin

Re: AIR FILL STATION PLANS

Post by ChipEck »

image.jpeg
Here is what the Olympic Shooting Center built.

The box is a cheap SnapOn gun safe. That way the can easily lock it when not in use.
Rover
Posts: 6986
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: AIR FILL STATION PLANS

Post by Rover »

Just curious; does that supply air only at 200 BAR?
ChipEck
Posts: 462
Joined: Tue Apr 23, 2013 5:50 pm
Location: Wisconsin

Re: AIR FILL STATION PLANS

Post by ChipEck »

I have a picture of the compressor and main air tank on the other side of the wall. Both the compressor and the air tank can go up to 4500 psi--but I did not look to see if they limit it to 3000 psi (200 BAR)

Chip
Bob Foth
Posts: 81
Joined: Wed Mar 03, 2004 1:00 am
Location: Colorado Springs, CO

Re: AIR FILL STATION PLANS

Post by Bob Foth »

It is limited to 200 Bar out at the fill station.
Good time for a reminder to never look at the manometer from in front of it, particularly while filling.
Dustin Clays
Posts: 42
Joined: Wed Jan 30, 2013 7:03 pm
Location: East Central, MN

Re: AIR FILL STATION PLANS

Post by Dustin Clays »

So what compressor (make/model) are they using?
ChipEck
Posts: 462
Joined: Tue Apr 23, 2013 5:50 pm
Location: Wisconsin

Re: AIR FILL STATION PLANS

Post by ChipEck »

I looked at a picture and it says Airetex

One of these. http://www.airetex.com/a45.html May not be that exact model.
User avatar
SlartyBartFast
Posts: 579
Joined: Fri Jun 10, 2016 11:04 am
Location: Montreal, Québec, Canada

Re: AIR FILL STATION PLANS

Post by SlartyBartFast »

Search paintball HPA fill panels. Many different regulated or unregulated pushbutton and lever models available.

https://www.google.com/search?q=paintba ... 0&bih=1125

Also SCBA fill stations.
- Smith & Wesson SW22 Victory
- FAS SP607
Post Reply