Does a roll pin or something else go in that hole?
Izhmash Sobol bolt/pin: roll pin needed?
Moderators: pilkguns, m1963, Craig1956
Izhmash Sobol bolt/pin: roll pin needed?
My used Sobol, after about ten rounds, had an issue where the firing pin jammed forward. I had to take a small punch to knock it back, then cleaned it and messed around with it until it seems to be working now, 100 rounds later. However, I noticed a small hole in the bolt body where a pin might go to retain the firing pin from going backwards. The pin itself also looks to be cut in a way that would allow that.
Does a roll pin or something else go in that hole?
![Image](https://lh6.googleusercontent.com/7CjC0AkDO-rgP5yIETABcTNSWqA8VE24n1RU-4jzIxg=w249-h442-no)
Does a roll pin or something else go in that hole?
Re: Izhmash Sobol bolt/pin: roll pin needed?
Yup, there's a pin in my Sobol bolt, but it looks like a solid pin
Rod
Rod
- Attachments
-
- Sobol bolt
- IMG_4787.JPG (58.92 KiB) Viewed 6132 times
Re: Izhmash Sobol bolt/pin: roll pin needed?
Thanks for the confirmation Rod, I reckon a roll pin should work as well.