.45 zero 185 reload info needed.

Brought to you by Zero Bullet Company Inc.

Moderators: pilkguns, m1963, Isabel1130

Post Reply
Steven C
Posts: 3
Joined: Sat Nov 26, 2016 6:32 am

.45 zero 185 reload info needed.

Post by Steven C »

[quote][/quote]Can anyone give me some suggestion about 45 reload. I have a les baer primer ii wad gun. And i bougnt zero 185 jhp. I have 700x and vv n310.. thanks.
Rover
Posts: 6986
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: .45 zero 185 reload info needed.

Post by Rover »

My suggestion is to buy a couple of loading manuals. Not only will you get loading data, but also directions on HOW to reload.

But, basically you want around 800fps with your 185 bullets.

You may want to try lead bullets. They're much cheaper and also use less powder.
Steven C
Posts: 3
Joined: Sat Nov 26, 2016 6:32 am

Re: .45 zero 185 reload info needed.

Post by Steven C »

I called zero. They suggest me to look at Hornady 185 jph. So this is what i found. 4.1 gr VV N310
185 gr Nosler JHP
New Winchester primed brass
1.20" overall length
approx 800 fps

Would that be a good point to start?
jglenn
Posts: 66
Joined: Tue Apr 28, 2015 5:53 pm
Location: Monroe Ga

Re: .45 zero 185 reload info needed.

Post by jglenn »

somewhere between 4.1 - 4.5 of N310 will be good
willnewton
Posts: 7
Joined: Thu Nov 03, 2016 8:11 am
Location: Eastern NC, USA

Re: .45 zero 185 reload info needed.

Post by willnewton »

185gr JHP, 1.204” COA, 0.469” crimp, 4.2gn VV N310, CCI Lg. pistol primer, Starline once fired case

chrono tested 775fps avg.

This is a good 50-yd SF load. You can also use 4.2gn Bullseye powder.

You can drop to 3.8gn of BE or VV N310 for a 25yd load.
Steven C
Posts: 3
Joined: Sat Nov 26, 2016 6:32 am

Re: .45 zero 185 reload info needed.

Post by Steven C »

Thanks, folks
RJP
Posts: 91
Joined: Thu Mar 11, 2004 9:37 am
Location: Florida

Re: .45 zero 185 reload info needed.

Post by RJP »

Try Vectan BA 10

4.0 gr for 185 JHP

3.4 for 185 LSWC
Leadbelly
Posts: 64
Joined: Sat Dec 30, 2017 5:03 pm
Location: Texas

Re: .45 zero 185 reload info needed.

Post by Leadbelly »

A very good reloading web site
http://www.hodgdonreloading.com/
I have used them for many years.
User avatar
Dipnet
Posts: 249
Joined: Tue May 27, 2014 3:21 pm
Location: Gainesville, Florida

Re: .45 zero 185 reload info needed.

Post by Dipnet »

I'm attaching a pdf of an excel spreadsheet for Zero 185-gr bullets (JHP AND LSWC-HP). These are my favorite bullets; the JHP is terrifically accurate at 50 yards (likes to go fast) and the LSWC-HP makes perfect cookie-cutter holes. I don't know why but they almost make me giggle, not that target shooting is fun. Cogent Safety Warning: 45 Load data are only intended as a general guide for load development; USE ALL SAFETY PRECAUTIONS (don't load while watching TV, drinking, smoking (Colorado, California, Washing warning), driving, or riding bareback. Yellow highlighted data are loads I've used or currently use. dipnet

pdf not uploading for some reason.
"185-gr Zero 45 ACP Load Data: For Reference Only (verify load data with powder manuals)"
Bullet weight (gr), type Powder Start Load, grs. Max Load, grs. Velocity, fps OAL Primer Source, Notes
185 Nosler/Zero JHP AA # 2 5.30 6.30 778-888 1.20" Fed 150 Nosler; crimp: 0.469
185 Nosler/Zero JHP AA # 5 ⎯ 10.70 1,160 1.24" CCI 300 1.1" at 25 yards w/Kimber
185 Nosler/Zero JHP AA # 5 8.6* 9.60 804-924 1.20" Fed 150 crimp: 0.469; accurate
185 Nosler/Zero JHP Bullseye ⎯ 7.30 1,155 1.24" CCI 300 1.2" at 25 yards w/Kimber
185 Nosler/Zero JHP Bullseye 4.40 5.40 720-840 1.20" Fed 150 crimp: 0.469; accurate
185 Nosler/Zero JHP Bullseye 4.50 ⎯ 828 1.25" Win LP Crimp 0.470
185 Nosler/Zero JHP HiSkor 700X 4.50* 4.70 1.21 crimp: 0.469, *50-yard load
185 Nosler/Zero JHP Power Pistol ⎯ 10.10 1,170 1.24" CCI 300 0.8" at 25 yards w/Kimber
185 Nosler/Zero JHP Ramshot Comp 4.30 5.10 845-954 1.20" Fed 150 Western
185 Nosler/Zero JHP Solo 1000 ⎯ 4.70 OAL 1.205, crimp: 0.469, 50-yard load
185 Nosler/Zero JHP Solo 1000 4.10 ⎯ 1.20" 25-yard load, crimp: 0.469
185 Nosler/Zero JHP Titegroup 4.70 5.70 852-980 1.20 Fed 150 crimp: 0.469;5.3gr. *most accurate
185 Nosler/Zero JHP Unique ⎯ 8.30 1,160 1.24" CCI 300 1.2" at 25 yards w/Kimber
185 Nosler/Zero JHP VV N100 4.80 5.30 957 1.21" Rem 2½
185 Nosler/Zero JHP VV N310 4.30 5.10 817-938 1.13" Fed 150
185 Nosler/Zero JHP VV N310 4.10 ⎯ 770-830 1.20" CCI 300
185 Nosler/Zero JHP VV N310 4.20 ⎯ 730 1.20" CCI 300
185 Nosler/Zero JHP VV N310 4.40 ⎯ 763-802 1.20" Fed 150 Crimp: 0.470; 1.675" @50yds
185 Nosler/Zero JHP VV N310 4.50 ⎯ 825 1.20" Win LP Best: 97-7x at 50 (1.20 OAL, crimp 0.469)
185 Nosler/Zero JHP VV N310 4.70* ⎯ 841-855 1.20" Fed 150 crimp 0.470; 1.595" group @50 yds
185 Nosler/Zero JHP VV N320 5.20 5.90 817-919 1.20 crimp: 0.469
185 Nosler/Zero JHP Win 231 5.10 6.1* 682-812 1.20 crimp: 0.469; *very accurate
185 Nosler/Zero JHP WST 4.80 4.90 25-yard load
185 Nosler/Zero JHP WST 4.50 ⎯ 50-yard load
185 Nosler/Zero JHP WST 4.60 5.00 1.24 crimp: 0.469
185 Nosler/Zero JHP WST 4.40 4.80 1.20 crimp: 0.469
185 Zero LSWC-HP Bullseye 3.80* ⎯ 691-713 1.18" Fed 150 crimp 0.469; *accurate 25 yd load; 9-lb spring
185 Zero LSWC-HP Bullseye 4.00 ⎯ 719-741 1.15" Fed 150 crimp 0.471; group=1.675"@50 yd
185 Zero LSWC-HP Bullseye 4.30 ⎯ 719-736 1.15" Fed 150 crimp 0.471; 1.75" @50y; sd 7.0
185 Zero LSWC-HP Clays 4.30 4.50 1.22" Fed 150 crimp: 0.469
185 Zero LSWC-HP Clays ⎯ 3.80 700 1.22" CCI LP crimp: 0.469
185 Zero LSWC-HP VV N310 3.80 ⎯ 691-718 1.21 Fed 150 crimp: 0.469 (not accurate)
185 Zero LSWC-HP VV N310 4.00 ⎯ 719-736 1.20 Fed 150 crimp 0.471; grp=1.675"@50y; sd 7.0
185 Zero LSWC-HP VV N320 5.20 6.2* 804-924 1.20 crimp: 0.469; *veryt accurate
185 Zero LSWC-HP WST 3.80 ⎯ 742-753 25-yard load
185 Zero LSWC-HP WST 3.80 4.2* 25-yard load; *50-yard load
185 Zero LSWC-HP WST 4.20 4.6* 25-yard load; *50-yard load
Misny
Posts: 993
Joined: Tue Mar 02, 2004 9:28 pm
Location: Indiana

Re: .45 zero 185 reload info needed.

Post by Misny »

I'm curious as to how many shots were fired for each group and the pistol used. Were these groups fired in a machine rest?
User avatar
Dipnet
Posts: 249
Joined: Tue May 27, 2014 3:21 pm
Location: Gainesville, Florida

Re: .45 zero 185 reload info needed.

Post by Dipnet »

All,
Should have said more about the data; they are compiled from published manufacturer load books and from my shooting trial and error; about 25% were shot with Ransom rest and the remaining using a decent pistol rest. My current loads: long ling, 4.5gr VV N310, OAL: 1.20", crimp: 0.469; timed and rapid fire, 3.8gr BE, OAL: 1.215, same crimp. In practice, I have shot a 97-7x with the long line load and this is the purported "AMU load" using new or once-fired brass. Bullseye powder is a good substitute for VVN310, but not exact for all charge weights. For my pistol (a 6-inch Rock River), I have to raise the Aimpoint red dot 8 clicks for the long line load (zero is 25 yards).

I repeat, the data are simply intended as a guideline. If you don't have one, get a chronograph as they really help in load development and to understand what is going on with your loads. I don't think I've ever shot Power Pistol or Clays with a 45. dipnet
tceva
Posts: 19
Joined: Tue Sep 05, 2017 5:10 am

Re: .45 zero 185 reload info needed.

Post by tceva »

DN,
If you pull a JHP bullet from one of your loads, do you have a slight distortion where the crimp is? I have been concerned about too much crimp.
I would like those Zeros to shoot at their optimum. Bad enough I have to hold the gun.
Thanks in Advance
Alex
User avatar
Dipnet
Posts: 249
Joined: Tue May 27, 2014 3:21 pm
Location: Gainesville, Florida

Re: .45 zero 185 reload info needed.

Post by Dipnet »

Alex,
Yep, slight depression at the crimp (a ring) but not to worry; it does not affect accuracy at least at 50 yards and probably not at all with respects to pistol accuracy. dipnet
Steve K
Posts: 17
Joined: Sun Mar 18, 2012 1:48 pm
Location: SW Virginia

Re: .45 zero 185 reload info needed.

Post by Steve K »

I've had good success with 4.2 gr. of BE.
joel
Posts: 460
Joined: Sat Jul 04, 2009 4:30 pm
Location: San Diego, CA

Re: .45 zero 185 reload info needed.

Post by joel »

I use 3.8gr Bullseye with the 185jhp. You can go to 3.6gr with lead.I also switched out my recoil spring with a 10lb spring and even manage to find all my brass.

Joel
SteveT
Posts: 282
Joined: Sat Mar 06, 2004 8:17 pm
Location: IL
Contact:

Re: .45 zero 185 reload info needed.

Post by SteveT »

Dipnet wrote:185 Nosler/Zero JHP VV N100 4.80 5.30 957 1.21" Rem 2½
Is that a typo? I've never seen VV N100 and all the N1xx powders are rifle powder and probably too slow for pistol.
User avatar
Dipnet
Posts: 249
Joined: Tue May 27, 2014 3:21 pm
Location: Gainesville, Florida

Re: .45 zero 185 reload info needed.

Post by Dipnet »

All,
The VVN100 is a typo; thanks for catching the error. I've corrected the file and attached a pdf. Thanks, dipnet
Attachments
Zero 185-gr Loads 45 ACP.pdf
(48.79 KiB) Downloaded 349 times
TonyT
Posts: 259
Joined: Fri Aug 20, 2004 6:50 am
Location: Michigan

Re: .45 zero 185 reload info needed.

Post by TonyT »

For 50ft to 25 yards I have used 3.7 gr. HS-700X, Rem 2 1/2, behind the 185 gr. LSWC for remarkably consistent velocity of ca 710 fps with as very low SD. A very accurate and pleasant shooting load.
Post Reply