Pardini 32 ACP Bullseye

Brought to you by Zero Bullet Company Inc.

Moderators: pilkguns, m1963, Isabel1130

Post Reply
gorbow
Posts: 10
Joined: Sat Sep 03, 2016 4:18 pm

Pardini 32 ACP Bullseye

Post by gorbow »

Does anyone know the barrel specs on the Pardini 32 ACP Bullseye model.
Bore
Length
Twist Rate
Rover
Posts: 6986
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: Pardini 32 ACP Bullseye

Post by Rover »

Why not ask Pardini USA?
gorbow
Posts: 10
Joined: Sat Sep 03, 2016 4:18 pm

Re: Pardini 32 ACP Bullseye

Post by gorbow »

I did. Spoke with Alex at Pardini USA. Ha claims that the barrel information is proprietary. In his words, if he told me the barrel specs and I copied them and the gun blew up he would be libel. Hmmm.....
Rover
Posts: 6986
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: Pardini 32 ACP Bullseye

Post by Rover »

We both know that's bullshit. Sorry I suggested it.
gorbow
Posts: 10
Joined: Sat Sep 03, 2016 4:18 pm

Re: Pardini 32 ACP Bullseye

Post by gorbow »

Yep
ghillieman
Posts: 251
Joined: Wed Jan 05, 2005 11:07 am
Location: Mineola, TX

Re: Pardini 32 ACP Bullseye

Post by ghillieman »

As of right now the HP's are imported with the European .313" diameter barrel and then chambered for 32 Auto in the states. I mentioned to Vladimir at Perry this year they should look into importing them with out barrels and installing a .311" diameter barrel since all 32 Auto bullets are .312 and intended for the .311 barrel. He said they were looking into that. So the barrel diameter could change in the future, maybe not.
I have a .311 in my HP installed by Dave Wilson.
gorbow
Posts: 10
Joined: Sat Sep 03, 2016 4:18 pm

Re: Pardini 32 ACP Bullseye

Post by gorbow »

ghillieman:

Thank you for the bore info. Do you happen to know the twist of the European barrel?

Gorbow
gorbow
Posts: 10
Joined: Sat Sep 03, 2016 4:18 pm

Re: Pardini 32 ACP Bullseye

Post by gorbow »

Reply from Pardini Italy

HP New Bullseye
Bore: .313
Length: 120mm = 4.7244 inches
Twist: 6D x 450mm = 1 x 17.7165 inches

A note to Pardini USA: I wouldn't waste my time or money copying these barrel dimensions.
Christopher Miceli
Posts: 324
Joined: Sun Aug 21, 2016 6:11 am
Location: Haymarket, VA

Re: Pardini 32 ACP Bullseye

Post by Christopher Miceli »

gorbow wrote:Reply from Pardini Italy

HP New Bullseye
Bore: .313
Length: 120mm = 4.7244 inches
Twist: 6D x 450mm = 1 x 17.7165 inches

A note to Pardini USA: I wouldn't waste my time or money copying these barrel dimensions.

LOL.. wonder if you can order it without a barrel =]
Chia
Posts: 359
Joined: Thu Aug 18, 2016 7:53 am

Re: Pardini 32 ACP Bullseye

Post by Chia »

Uh...are they using a .32S&W bolt and recoil spring with a .32 acp barrel? Or am I missing something here?
fc60
Posts: 732
Joined: Fri Nov 25, 2005 11:46 am
Location: Western Washington State, USA 98385

Re: Pardini 32 ACP Bullseye

Post by fc60 »

Greetings,

PardiniUSA supply a 32 ACP bolt with the 32 ACP pistols and conversion units.

The 32 ACP rim is smaller than the 32 S&W Long and as a result, the 32 S&W Long will not fit.

This prevents loading a 32 S&W Long in a 32 ACP by error.

Cheers,

Dave
Chia
Posts: 359
Joined: Thu Aug 18, 2016 7:53 am

Re: Pardini 32 ACP Bullseye

Post by Chia »

fc60 wrote:Greetings,

PardiniUSA supply a 32 ACP bolt with the 32 ACP pistols and conversion units.

The 32 ACP rim is smaller than the 32 S&W Long and as a result, the 32 S&W Long will not fit.

This prevents loading a 32 S&W Long in a 32 ACP by error.

Cheers,

Dave
Thanks for that clarification!
Post Reply