Pardini HP Scope Rail

Brought to you by Zero Bullet Company Inc.

Moderators: pilkguns, m1963, Isabel1130

Post Reply
beeser
Posts: 121
Joined: Tue Jun 10, 2014 4:05 pm

Pardini HP Scope Rail

Post by beeser »

Does anyone know whether the scope rail shown below is available from PardiniUSA? It seems like a better way to go than using the scope mounts usually provided by them. The image was taken from PardiniCanada.
Image
Trooperjake
Posts: 794
Joined: Sat Dec 18, 2010 9:22 pm
Location: Cookeville, TN

Re: Pardini HP Scope Rail

Post by Trooperjake »

Larry's Guns in Maine makes and sells them,
And yes it is a better way to mount a Red Dot.
Mine is older before the combo irons were available.
jbzeus
Posts: 60
Joined: Sun Sep 15, 2013 9:24 pm

Re: Pardini HP Scope Rail

Post by jbzeus »

Larry's makes two styles. One has the setup for the iron sight on the back while the other does not. $100 and 90 respectively. i have the one with the sight on my .22 and the other one on my .32acp. If I did it again I would probably not get the one with the sight as I probably never will shoot irons.

Pardini has the same thing but is more expensive I think. I couldn't find it on their site but have before.
fc60
Posts: 732
Joined: Fri Nov 25, 2005 11:46 am
Location: Western Washington State, USA 98385

Re: Pardini HP Scope Rail

Post by fc60 »

Greetings,

When you do buy your scope rail, verify if the mounting screws are Imperial or Metric.

I repaired several "professional" installations in the past where Imperial screws were installed and Metric should have been used.

Metric screws have a 90 degree countersink.

Imperial are "usually" 84 degrees.

Also use caution when drilling and tapping the shroud to avoid damage to the barrel. Start with a Plug tap and finish with a bottom tap.

Clean the threads with solvent and apply a little dab of Blue LocTite.

Cheers,

Dave
ghillieman
Posts: 251
Joined: Wed Jan 05, 2005 11:07 am
Location: Mineola, TX

Re: Pardini HP Scope Rail

Post by ghillieman »

Call Warne Precision.

Or call us at 1-800-683-5590 Toll Free, Monday-Friday 7:30am-4:00pm Pacific

Order two front mounts for a CZ 550 rifle, it's the same 19mm European dove tail that's on the Pardini. Rings are high quality and stay put, tell them it's a Pardini pistol and they will know what to send you.

Available in 25mm or 30mm, fixed or quick detach.

No need to drill and tap the Pardini.
Post Reply