32 Auto using VVn320 with the 60 SWC

Brought to you by Zero Bullet Company Inc.

Moderators: pilkguns, m1963, Isabel1130

Post Reply
Trooperjake
Posts: 794
Joined: Sat Dec 18, 2010 9:22 pm
Location: Cookeville, TN

32 Auto using VVn320 with the 60 SWC

Post by Trooperjake »

I was wondering if anyone did any testing with your cast 60 SWC and VVn320 powder?
If so, what loads did you try? What result at 50 and 25.
Please include any other data, like lube, taper crimp, etc.
I searched TargetTalk and could not find any results.
fc60
Posts: 732
Joined: Fri Nov 25, 2005 11:46 am
Location: Western Washington State, USA 98385

Re: 32 Auto using VVn320 with the 60 SWC

Post by fc60 »

Greetings,

I tried VV-N320 with the Accurate 31-065H bullet cast of LinoType and sized 0.314".

The targets are attached for your reference.

Barrel is a Pardini 32 ACP mounted in a mechanical fixture. Groups are all ten shots at 50 yards.
Attachments
314.2014.03.0030.jpeg
314.2014.03.0030.jpeg (17.83 KiB) Viewed 1403 times
314.2014.03.0031.jpeg
314.2014.03.0031.jpeg (18.17 KiB) Viewed 1403 times
314.2014.03.0032.jpeg
314.2014.03.0032.jpeg (18.13 KiB) Viewed 1403 times
314.2014.03.0033.jpeg
314.2014.03.0033.jpeg (17.62 KiB) Viewed 1403 times
314.2014.03.0034.jpeg
314.2014.03.0034.jpeg (17.06 KiB) Viewed 1403 times
Trooperjake
Posts: 794
Joined: Sat Dec 18, 2010 9:22 pm
Location: Cookeville, TN

Re: 32 Auto using VVn320 with the 60 SWC

Post by Trooperjake »

That's quite an extreme!
Thanks,
Post Reply