Pardini HP .32 acp stovepipe

Brought to you by Zero Bullet Company Inc.

Moderators: pilkguns, m1963, Isabel1130

dmw6455
Posts: 28
Joined: Sat Jun 18, 2011 9:42 am
Location: Los Altos, CA

Pardini HP .32 acp stovepipe

Post by dmw6455 »

Just received my Pardini HP .32 acp. Went to the range with 3 loads. Hornady 60 grain xtp factory load, Special Hornady 60 grain xtp factory load and my own load (Hornady 60 grain xtp with 1.8 v310 per Vladimir). Was testing for groups, so was shooting off a sandbag. All 3 were giving one stove pipe practically for every 5 shots. This was a brand new pistol that I shot right out of the box without any cleaning. The only thing I did was add a Ultradot Match dot scope. Normally, if it was my own load I would bump up a tenth of grain and see what happened, but was had this even with the factory loads. Any ideas anyone?
pistol champ
Posts: 132
Joined: Thu Dec 25, 2008 4:35 pm
Location: Eastern PA

Re: Pardini HP .32 acp stovepipe

Post by pistol champ »

Look up "Pardini HP ammo" talk there is a lot of info that will help you out.
What size groups are you getting.
dmw6455
Posts: 28
Joined: Sat Jun 18, 2011 9:42 am
Location: Los Altos, CA

Re: Pardini HP .32 acp stovepipe

Post by dmw6455 »

I did not shoot enough rounds to determine group size. Got side tracked with the stovepipe issue. Seems like others resolved the problem by changing the mag spring to the .22 spring. I will call Pardini tomorrow and ask that question.
Jodykid
Posts: 9
Joined: Mon Jun 29, 2009 2:20 pm
Location: NorCal

Re: Pardini HP .32 acp stovepipe

Post by Jodykid »

Let me know what you come up with. I pick up my HP32 on Thursday.

Joe
dmw6455
Posts: 28
Joined: Sat Jun 18, 2011 9:42 am
Location: Los Altos, CA

Re: Pardini HP .32 acp stovepipe

Post by dmw6455 »

Talked to Alix this morning from Pardini and the fix for the stove piping is just as someone else said. You need to order the .22 magazine springs and remove the .32 spring and put in the .22 springs. It seems that due to the light loads of the .32 acp the bolt does not return fast enough in relation to the push of the .32 magazine springs. I asked him about getting a lighter recoil spring instead, but he said this seems to solve the problem. Will let you know how they work after I receive them and test.
Trooperjake
Posts: 794
Joined: Sat Dec 18, 2010 9:22 pm
Location: Cookeville, TN

Re: Pardini HP .32 acp stovepipe

Post by Trooperjake »

The mag spring or recoil spring is not the problem,
the problem is the lips of the mag are too wide and let the bullet out too soon.
Search my name on this forum for a photo of how to correct the problem. I no longer have the photo.
I shot a match yesterday and not one problem with feeding. I have 5 mags.
It surprises me Pardini has not picked up on this.
User avatar
conradin
Posts: 2003
Joined: Sun Apr 29, 2012 1:18 am
Location: Basement.

Re: Pardini HP .32 acp stovepipe

Post by conradin »

I have the SP with the 32 conversion. Never have any problem when shooting 32.
Trooperjake
Posts: 794
Joined: Sat Dec 18, 2010 9:22 pm
Location: Cookeville, TN

Re: Pardini HP .32 acp stovepipe

Post by Trooperjake »

Use a 9/32" drill as a test Rod.
Tap carefully where the arrows point.
The original posting is titled, "Pardini 32 HP ammo talk"
I cannot take credit for it, this was a big problem and someone else cured it,
I only took a photo to help others.
Attachments
image.jpg
image.jpg (15.52 KiB) Viewed 5681 times
dmw6455
Posts: 28
Joined: Sat Jun 18, 2011 9:42 am
Location: Los Altos, CA

Re: Pardini HP .32 acp stovepipe

Post by dmw6455 »

Thanks. I will give that a try.
Murph
Posts: 196
Joined: Tue Aug 20, 2013 4:02 pm

Re: Pardini HP .32 acp stovepipe

Post by Murph »

tune the mags as described, and use 22 mag springs......and it'll be your favorite gun.
That's all I did and mine runs perfect with any ammo and all loads.
cgroppi
Posts: 111
Joined: Wed Sep 28, 2011 12:50 am
Location: Tempe, AZ

Re: Pardini HP .32 acp stovepipe

Post by cgroppi »

What's interesting is not everyone has this problem. My 32 ACP has worked perfectly without any messing about from the day I got it. Never had to mess with magazine lips, springs or anything.

I did have a few stovepipes with my lead bullet load when I tried decreasing the charge from 2.0gr to 1.9gr of titegroup, but the problem went away when I went back to the hotter load.
User avatar
Dipnet
Posts: 249
Joined: Tue May 27, 2014 3:21 pm
Location: Gainesville, Florida

Re: Pardini HP .32 acp stovepipe

Post by Dipnet »

dmw6455,
When you get the bugs ironed out, you will love this pistol. Follow Trooperjake's suggestions; they helped me with same issue. For 60gr Hornady JHPs, the current hot load is: 2.30 grains Tigegroup, seat depth 0.925, fed primer, crimp 0.332. This load gives excellent accuracy at 50 yards. I am currently using Federal Ni brass that I bought from one of the online used brass suppliers. I've summarized the 32 ACP load data from various sources; ONLY USE THESE DATA AS A GUIDE IN CONJUNCTION WITH ALL RELOADING PRECAUTIONS. Good luck, dipnet

Bullet (Make, type) Powder Start, gr. Max, gr. Vel, Start Vel, Max Notes
60gr HDY XTP 700x 1.8 2.3 800 1,000
60gr HDY XTP AA No. 2 1.7 2.5 800 950
60gr HDY XTP Bullseye 1.9 2.3 850 950
60gr HDY XTP Clays 1.4 1.6 800 950
60gr HDY XTP Clays Int'l 1.7 2.0 800 950
60gr HDY XTP Clays Univ. 2.4 2.6 800 1000
60gr HDY XTP Green Dot 2.1 2.4 800 950
60gr HDY XTP Titegroup 2.3 OAL: 0.925, 0.332 crimp; 1.1" at 50yds
60gr HDY XTP Win 231 2.0 2.5 800 950
60gr HDY XTP VV N310 1.8 OAL: 0.894; crimp: 0.330, 2-in. accuracy at 50yds
60gr HDY XTP VV N320 1.6 2.1 800 950
60gr Speer GDHP AA No. 2* 2.6 963
60gr Speer GDHP Bullseye* 2.6 1,030
60gr Speer GDHP H. Universal* 3.0 1,021
60gr Speer GDHP Power Pistol* 3.6 1,030
60gr Speer GDHP Red Dot* 2.3 1,030
60gr Speer GDHP Titegroup* 2.6 1,058
60gr Speer GDHP Unique* 3.2 971
60gr Speer GDHP VV N310 1.7 1.9 720 875 NMB; <1.0-in accuracy at 25 yds.
60gr Speer GDHP Win 231
60gr Speer GDHP 700x* 2.6 1,060
71gr SIE FMJ AA No. 2 2.0 2.2 572 650 19300 psi
71gr SIE FMJ AA No. 5 2.9 3.2 619 703 19700 psi
71gr SIE FMJ AutoComp 2.7 3 879 937 COL: 0.978
71gr SIE FMJ Win 231 2.1 2.3 805 871 COL: 0.978
71gr SIE FMJ Titegroup 2.0 2.2 824 910 COL: 0.978
71gr SIE FMJ Universal 2.2 2.4 781 881 COL: 0.978
71gr FMJ AS30N 1.5 1.7 745 830 15,000 cup
71gr FMJ AP70N 2.2 2.4 780 880 14,900 cup
71gr Win FMJ AutoComp 2.7 3.0 879 937
71gr SIE FMJ Bullseye 2.0 2.2 835
71gr SIE FMJ Titegroup 2.0 2.2 824 910
71gr SIE FMJ VV N310 2.0 2.2 1,001
75gr Rimrock RNFP Unique 2.6 2.9 1,035 0.915 OAL
75gr Rimrock RNFP Win 231 2.4 2.7 1,069 0.915 OAL
75gr Rimrock RNFP Bullseye 1.7 2.6 803 1,067 0.915 OAL
75gr Rimrock RNFP Titegroup 2.3 2.5 1,089 0.915 OAL
75gr Rimrock RNFP Titegroup 2.0 0.940 OAL; 0.332 crimp, 2.6" at 50 yds
75gr Rimrock RNFP V N320 2.3 2.5 1,074 0.915 OAL
75gr Rimrock RNFP Win WST 1.7 2.1 857 958 0.925 OAL
85gr HDY XTP No. 2 1.6 1.8 612 695 18800 psi
85gr HDY XTP No. 5 2.2 2.4 615 699 19100 psi
dmw6455
Posts: 28
Joined: Sat Jun 18, 2011 9:42 am
Location: Los Altos, CA

Re: Pardini HP .32 acp stovepipe

Post by dmw6455 »

Thanks for the great load info. I will definitely try the titegroup.
User avatar
Dipnet
Posts: 249
Joined: Tue May 27, 2014 3:21 pm
Location: Gainesville, Florida

Re: Pardini HP .32 acp stovepipe

Post by Dipnet »

I just received a notification this morning that Titegroup was available at: http://www.butchsreloading.com/shop/rel ... -1lbs.html

dipnet
dmw6455
Posts: 28
Joined: Sat Jun 18, 2011 9:42 am
Location: Los Altos, CA

Re: Pardini HP .32 acp stovepipe

Post by dmw6455 »

Can anyone tell me how you take the magazine apart to change springs. I must be dense as I have tried all the normal methods one uses to take apart magazines, but can't do it.
Trooperjake
Posts: 794
Joined: Sat Dec 18, 2010 9:22 pm
Location: Cookeville, TN

Re: Pardini HP .32 acp stovepipe

Post by Trooperjake »

There is a single pin in the plastic base, be careful when pulling it apart after drifting the pin.
dmw6455
Posts: 28
Joined: Sat Jun 18, 2011 9:42 am
Location: Los Altos, CA

Re: Pardini HP .32 acp stovepipe

Post by dmw6455 »

Update: Changed the magazine springs to the .22 springs. It works. Only 1 stovepipe in 80 shots. May also do the other fix recommended. Still not comfortable reporting results on my loads as I am getting larger groups than others are reporting for both the Hornady 60 with 1.8 of V310 and 2.3 of Titegroup. Right now the V310 load is better. Waiting on getting an X-small powder bar from Dillon and do a few other tweaks to make sure the loads are more accurate. Been testing off 4 3" blocks and 2 sandbags, so not as accurate a method as a Ransom rest.
pistol champ
Posts: 132
Joined: Thu Dec 25, 2008 4:35 pm
Location: Eastern PA

Re: Pardini HP .32 acp stovepipe

Post by pistol champ »

Murph wrote:tune the mags as described, and use 22 mag springs......and it'll be your favorite gun.
That's all I did and mine runs perfect with any ammo and all loads.
I also did the springs and mag change and now have no problems at all thousands of rounds without a stovepipe. I could not get through 3 rounds without getting a stove pipe when I first got mine.
oldcaster
Posts: 617
Joined: Tue Dec 01, 2009 9:09 pm
Location: Chesterfield Missouri

Re: Pardini HP .32 acp stovepipe

Post by oldcaster »

dmw6455 wrote:Update: Changed the magazine springs to the .22 springs. It works. Only 1 stovepipe in 80 shots. May also do the other fix recommended. Still not comfortable reporting results on my loads as I am getting larger groups than others are reporting for both the Hornady 60 with 1.8 of V310 and 2.3 of Titegroup. Right now the V310 load is better. Waiting on getting an X-small powder bar from Dillon and do a few other tweaks to make sure the loads are more accurate. Been testing off 4 3" blocks and 2 sandbags, so not as accurate a method as a Ransom rest.
If it isn't already too late, I think you would be better off getting the Unitek measure except it is a lot more expensive. It was recommended somewhere that the plastic model is a better choice. This is what I bought and am satisfied with it. It is very easy to get to an individual load if you kept records of how it was adjusted the last time as it is quite repeatable.

I am presently using 1.5 grains of tightgroup with the 60 grain lead bullet and have no problems. I cut two coils off my stock magazine spring, bent the edges in and have a 22 recoil spring. I don't know if it would be a good idea to shoot 60 grain jacketed bullets at commercial speeds with the 22 recoil spring though.
tomv
Posts: 69
Joined: Wed Dec 17, 2014 6:00 am

Re: Pardini HP .32 acp stovepipe

Post by tomv »

I believe that I need to do the mod to my mag lips. Just to be sure I understand, is the 9/32 drill supposed to stay in the lips until the end as it is pulled out?
Post Reply