Is anyone expert at the trigger adjustments on a Unique 32U?

old, good http://www.midcoast.com/~pilkguns/bbs/

Moderators: rexifelis, pilkguns

Post Reply
JLK

Is anyone expert at the trigger adjustments on a Unique 32U?

Post by JLK »

Thanks!
.49082.0
David M

Unique Trigger

Post by David M »

Whats the problem?
.49113.49082
JLK

David, I would like to put as much "roll" in as possible but

Post by JLK »

that I don't quit understand the instructions.
Thanks!

.49118.49113
David M

Roll off

Post by David M »

To give the trigger roll off you need to increase the second stage travel.
Now the Unique trigger as factory set the second stage travel and weight is the double concentric screw in front of the trigger.
The inner screw is the weight and the outer adjusts the contact point for the second stage trigger point.
Once you reset the travel you will need to reset the sear travel so the engage position of the transfer bar engages at the same time as the second stage point (otherwise you will end up with a three stage trigger). It is not difficult but just time consuming to get the feel right.

.49174.49118
JLK

Thanks!

Post by JLK »

: To give the trigger roll off you need to increase the second stage travel.
: Now the Unique trigger as factory set the second stage travel and weight is the double concentric screw in front of the trigger.
: The inner screw is the weight and the outer adjusts the contact point for the second stage trigger point.
: Once you reset the travel you will need to reset the sear travel so the engage position of the transfer bar engages at the same time as the second stage point (otherwise you will end up with a three stage trigger). It is not difficult but just time consuming to get the feel right.

.49211.49174
Post Reply