TargetTalk

pm sent

DON'T WASTE YOUR TIME WITH THE 100GR HBWC. THEY USED TO BE SOLD BY A COMPANY NAMED 3-D BULLETS (OR AMMO). THEY WERE NOT GOOD PAST 15YDS . THESE WERE TESTED IN MANY PPC REVOLVERS. 148GR HBWC FROM A PPC REVOLVER WILL GROUP ABOUT THE SIZE OF A NICKLE AT 25 YDS. THE 100GR WOULD NOT HOLD X-RING AT 25YDS....

I DID RANSOM IT AT 50 YDS WITH A MARVEL. IT SHOT NO BETTER THAN THE CCI SV. THE MARVEL IS A GREAT SHOOTER. WITH LAPUA CENTER-X IT SHOOTS UNDER A HALF INCH. WITH CCI SV AND BULLSEYE X IT SHOT ABOUT 7/8". JP

http://www.michiganammo.com/ I USED THEIR DISTINGUISHED PISTOL AMMO FOR YEARS WHEN I WAS ACTIVE IN PPC SHOOTING. I WOULD LOOK AT THE 121GR OR 147GR 9MM FOR YOUR PURPOSE. THE OWNERS WERE BOTH HIGH MASTER PPC SHOOTERS. THE WIFE (NORMA) WAS THE LADIES NATIONAL PPC CHAMPION ONE YEAR (1997 IF I REMEMBER ...

ARE YOU BUYING OR LOADING AMMO?

WHY 3?
I HAVE 2 WITH DOTS. BECAUSE MY INDOOR AND OUTDOOR ZEROS ARE WAY DIFFERENT.
I HAVE A 6" FOR DISTINGUISHED FOR THE INCREASED SIGHT RADIUS.
SO WHY NOT ? JP

I WOULD BUY A MARVEL ALUMINUM LOCK BACK CONVERSION. I OWN 3 DIFFERENT MARVELS. I HAVE RANSOM REST TESTED ALL OF MINE. ALL ARE UNDER AN INCH AT 50YDS WITH CCI SV. ALL ARE UNDER 1/2 INCH AT 50YDS WITH LAPUA SIGNUM. ALSO DENNIS FROM MARVEL IS AT PERRY EVERY YEAR SUPPORTING AND PARTICIPATING ALONG SIDE ...

I HAVE 3 MARVELS , 1 INDOOR, 1 OUTDOOR, 1 DISTINGUISHED . ALL WORK WELL WITH CCI SV. AGUILIA HAS WORKED WELL IN THE PAST BUT IS REALLY LOT # SENSITIVE. I HAVE ABOUT THAN 2K OF LAPUA SIGNUM LEFT . ALL SHOOT THAT THE BEST AT 50YDS FROM THE RANSOM REST. ALL SHOOT UNDER 5/8 INCH WITH THE SIGNUM. JP

I'VE DONE A LOT OF RANSOM REST TESTING IN 9MM. OF COURSE AT 50YDS. SEVERAL DIFFERENT ROCK RIVER 1911'S AND A FEW BERETTA'S, BOTH TONY KID AND DAVID SAMS VERSIONS. S&W PPC9'S. SEVERAL DIFFERENT BARRELS, KKM 1-32, KART 1-16, BARSTO AND S&W 1-18(IF I REMEMBER CORRECTLY) IN ALL GUNS I'VE FOUND T...

I'VE BEEN LOADING ON A RL1050 FOR APP. 25 YEARS. YES I SHOOT PPC . I NEVER HAD A PROBLEM WITH LIGHT HITS. I ADJUSTED THE PRIMER SEATING DEPTH AS DESIGNED BY DILLON . BETWEEN THE SIZING DIE AND SWAGING STATION ON THE TOOL HEAD IS THE ROD THAT PUSHES ON THE PRIMING ARM. BY SCREWING IT DOWN FROM THE TO...

HP38 AND WINCHESTER 231 ARE THE SAME POWDER IN DIFFERENT CANS. WE USED TO BUY IT FROM STAR BULLETS IN 30LB DRUMS.IT HAD BOTH IDS ON THE LABEL. IF YOU CHECK THE HODGDON WEB SITE FOR LOADING DATA THEY LIST BOTH POWDERS WITH IDENTICAL CHARGES AND RESULTS. JP

I HAVE USED 4.0 GR OF WSF WITH GREAT SUCCESS. JP

A LIGHT LOAD THAT SHOULD SUIT YOUR NEEDS.

4.0 GR WSF, 147GR FMJ OR JHP.

4.0 - 4.3 WILL WORK FINE FOR THE 125 GR LEAD. JP

MY FAVORITE ARE AS FOLLOWS
.45 CLEANEST AND MOST ACCURATE VV310 2ND WST
9MM CLEANEST AND MOST ACCURATE VV330 2ND WSF

I HAVE FOUND THAT SAME THING WITH THE 9MM AND .45ACP NEW STARLINE BRASS. I NOW RUN THEN IN THE TUMBLER FIRST BEFORE I LOAD THEM. I REDUCES THE SHAVING A LOT . BUT DOESN'T ELIMINATE THEM. JP

NOPE. ONE HAS A ROUNDED BOTTOM THE OTHER IS SQUARED. JP

CASEPRO 100 IS STILL BEING MADE. I JUST BOUGHT ONE IN 9MM & .45. IT WORKS WONDERS. JP

231 WORKS FINE ALSO. 5.1GR ABOUT 1.5" AT 50YDS WITH THE XTP A LITTLE BIT LARGER WITH THE HAP. BUT THE GUN NEEDS TO BE CLEANED MORE OFTEN. JP You are talking 9mm here right? YES I WAS TALKING 9MM. BUT HE STUMBLED INTO ONE OF THE FEW TIMES IT WORKS FOR BOTH. .45 RELATED; I HAVE FOUND THE ZERO 18...

231 WORKS FINE ALSO. 5.1GR ABOUT 1.5" AT 50YDS WITH THE XTP A LITTLE BIT LARGER WITH THE HAP. BUT THE GUN NEEDS TO BE CLEANED MORE OFTEN. JP

AS FAR AS 9MM LOADS MOST ACCURATE BULLET HORNADY 115GR XTP 2ND HORNADY 115 0R 121 GR HAP 3RD ZERO 115GR CONICAL (ALMOST A DEAD TIE WITH THE HAP) BEST POWDER VV330 5.0GR 2ND WSF 5.4GR OAL 1.142" FED PRIMER UNDER AN INCH WITH XTP AND VV330 1.25" WITH WSF AND HAP THIS IS WITH 3 DIFFERENT 9MM ...