TargetTalk

Greetings, A little Google Translate for those like me... "In my family we own a FW C20 and another Steyr LP1, both in CO2, they are wonderful how they work and without failures, both on a test bench, they make a single hole with H&N pellets, I do not change them for compressed air ones, Th...

Greetings,

I need some dimensions to reverse engineer a recoil spring for the "IVAN" 22lr. (IZH-35M)

Free Length =

Number of coils =

Outside Diameter =

I need dimensions from a NEW spring.

Cheers,

David

Greetings, Accuracy with both the old and new Pardini barrels is roughly the same. The older barrels are not fully heat treated , about 80 HRB, and the chambers tend to erode due to the abrasive material in the priming compound. The latest Pardini Barrels I have seen and have tested are hardened to ...

Greetings,

Check with your Pardini parts supplier.

Pardini does not offer parts for some of the older models.

Cheers,

Dave

Greetings, Based on memory, the Walther KSP200 was a copy of the IZH-35M. https://carl-walther.com/uploads/media/partsdrawings/KSP200_2647206_c.pdf Some parts are still available from Germany. https://schiesssport-billharz.eu/KSP https://schiesssport-billharz.eu/2644207-Vorholfeder Judith is nice to...

Greetings, @porkchop I do not shoot as much and my SCUBA tank needed a Hydro test and I did not want to spend the money. With CO2, the pressure is constant as long as there is liquid in the cylinder. Yes, temperature will cause the pressure in the pistol to vary; but, I shoot indoors and the tempera...

Greetings, I recently sold my PCP Air Pistol and went to the CO2 powered Walther CPM-1. It came with a 20# Fire Extinguisher and you get a lot of refills per tank. When it is empty, just return it to the shop for a new one. No Hydro nor Annual inspections... The pellet velocity is the same with CO2 ...

I might know someone in Mass who would be interested, he has a bolt with a crack and parts are no longer available. Probably the same situation as the one you own would be in, PardiniUSA lists out parts but they are no longer being made for the really old versions. What price are you looking for an...

Greetings,

Music Wire is already hardened.

Once you bend the spring to shape, stress relieve it in the oven at 450 degrees F for 30 minutes.

I have lots of Music Wire. I can send you some short pieces via USPS if needed.

Cheers,

Dave

Greetings,

Check with Neal Stepp at ISS in Texas.

He had a lot of spares for the FAS.

Might get lucky.

Cheers,

David

Greetings,

Pardini does not supply parts for some of the older models.

Need to talk with the folks at PardiniUSA to see what model you have and parts availability.

Cheers,

Dave

bnice wrote: ↑Wed Jan 24, 2024 7:41 pm Tried to register, how long does it take to get approval?

I had my confirmation email a few seconds after I pressed "Submit".

Might check your SPAM folder.

Cheers,

Dave

Greetings,

A fellow shooter in Greece came to the rescue!!!

http://www.airgunsitaly.it/viewtopic.php?t=51487

YES, you have to join the forum.

However, this is the first forum I have joined that translates into English as I am Italian poor.

Cheers,

David

Greetings,

I would like to have an off line discussion with anyone who successfully took apart a SAM10 and re-assembled it to working condition.

Cheers,

Dave

Greetings,

Did not Marlin offer a Target Rifle in 22lr?

If yes, what was the model number?

Did it have the Micro-groove rifling?

Cheers,

Dave

Greetings, I recently came into possession of a Walther CPM-1. The CO2 cylinders are mounted in a vertical position close to the trigger. This moves the center of gravity more rearward. Also, you can unscrew the rod for the adjustable weights and leave it in your shooting box. It is still CO2 and pa...

Greetings,

Does anyone have a list of the O-Rings used in the SAM10 air pistol?

Any information is welcome. Metric size, material used, and a reference to the SAM10 part numbers.

Cheers,

David

Greetings,

Judith Billharz has many Walther parts.

https://schiesssport-billharz.eu/CP-2-W ... 0-13250_s1

They are listed by the Walther part number.

I thought I saw the link there; but, now I cannot find it.

Cheers,

Dave

Greetings, I am at the O-Ring point. Looking at Buna-N (70A) material as it is oil resistant. (I ordered a tube of Crosman PellGun Oil.) Interesting as the O-Rings I removed (Piston and valve) were Red suggesting they were Silicon. When I put the beastie back together, what FPS via the chronograph s...

Greetings marky-d,

Many thanks!!!

I shall go and exert more force.

Cheers,

Dave